LabWindows/CVI
6.x Visa Soft Front Panel (SFP) for the IFR3410 Series Of Signal Generators
(Issue 1).
The
software automatically detects if an IFR3410 Series Signal Generator is
connected via the GPIB (any legal address). If connected the software acts as a
Front Panel Controller for the instrument. If an instrument is not connected
then the software acts as a 3414 simulator to demonstrate the instruments MMI.
Included
Files: ifr3410sfp.exe ,
ifr3410sfp.uir
Both files
MUST be put in the same directory. Just launch ifr3410sfp.exe.
To use this
SFP, Visa 2.5 RTE (or later) and CVI 6.0 RTE (or later) is required.
The CVI 6.0
RTE is included in this installation package.
Please NOTE you must install the Visa RTE
BEFORE installing this package.
Link to
Visa RTE (Latest):